Proofing cell 8 trays 47x34 cm or GN 2/3 with digital control panel and humidification.
Standard equipment: internal basin for humidification.
CHARACTERISTICS
- Stainless steel structure and cooking chamber;
- Activation temperature of the resistors: 20°/60° C (the cell has no cooling effect: if you set, for example, a temperature of 10° C, the resistors will not activate; in this case, the temperature inside the cell will depend mainly on the ambient temperature outside the cell);
- Temperature fluctuation from the set value: +/-1.5° C;
- Internal lighting with halogen lamps;
- Pressure door seal;
- Low emissivity glass door;
- Direct steam injection with electronic regulation;
- Humidity button;
- Manual loading of water into the basin;
- Can also be used dry, without adding water to the basin;
DIGITAL CONTROL PANEL
A - Temperature
B - Time
C - Humidification
D - Start / Stop
E - Decrease
F - Increase
G - ON / OFF
DATA SHEET
Dimensions : L.60 x D.69 x H.86 cm
Capacity : 8 trays 45/47 x 34 cm - GN 2/3 (35.4 x 32.5 cm)
Distance between trays : 7.5 cm
Temperature : 20° / 60° C
Power : 2 kW
Voltage : 230V / 50 Hz
Weight : 40 kg
Appliance not suitable for built-in installation, it is mandatory to leave a free space of 5 cm all around.
The installation requires a connection to the water system.
Italiano
Français
