Glasswasher with 36 cm round basket with electromechanical control. Upper and lower panel in stainless steel.

DATA SHEET

Dimensions: L.42.5 x D.45.5 x H.60.6 cm

Basket dimensions (fixed round): 36 cm

Useful height: 18 cm

Number of cycles: 1

Power supply: 230 V | 50Hz

Washing pump power: 0.22 kW

Boiler resistance : 2.7 kW Tank resistance : 1.8 kW

Maximum power absorbed : 2.92 kW

Tank capacity: 11 litres

Boiler capacity: 5 litres

Wash/rinse temperature: 55°-85° C

Cycle duration: 120 seconds

Cycles hour: 30

Supply pressure: 2-4 bar

Inlet/outlet hose (diameter): 3/4" | 25Hz

Feed water: max 50° C

Noise level: <60 dBa

Weight: 27kg

STANDARD EQUIPMENT

Cold rinse

Rinse aid dispenser

OPTIONAL ACCESSORIES

Peristaltic rinse aid dispenser

Detergent dispenser

Drain pump

Before purchasing.

Before making the purchase, check the positioning of the drain in your room, whether the drain is positioned on the floor and on the wall (up to 5 cm from the floor) or on the wall (more than 5 cm from the floor) .

1st case : If the drain is positioned on the ground and on the wall (up to 5 cm from the floor), you can purchase any type of machine since all the machines produced are designed for gravity-driven water drainage.

2nd case : If the drain is positioned on the wall (more than 5 cm from the floor), you must purchase the drain pump in addition to the standard machine. You can do this at the same time as purchasing the machine (in this case it will be installed directly and at no cost), or you can also do it at a later time (after purchasing the main machine). This is possible since all the machines are designed for the installation of the loading pump.

You can find the drain pump kit - 32 W among the Accessories in the product sheet or by searching for the corresponding code in the search bar (RF_03347 ).